Today's Clinical Lab - News, Editorial and Products for the Clinical Laboratory
Man giving saliva sample

Clinical Trial Shows Testing Saliva for COVID-19 Is as Reliable as Nasal Swab

Findings build on collaborative effort to design 3D-nasopharyngeal swabs to alleviate COVID-19 testing bottleneck

Beth Israel Deaconess Medical Center
Published:Aug 20, 2021
|3 min read
Register for free to listen to this article
Listen with Speechify
0:00
3:00

BOSTON, MA — As the highly transmissible Delta variant of the virus that causes COVID-19 surges in the United States and around the world, rapid and accessible COVID-19 testing and increased vaccination are key to managing the virus’ spread. Nasopharyngeal (NP) swabs—long, medical-grade probes used to collect samples from deep in patients’ noses and throats—are the gold standard for COVID-19 diagnostic testing. However, memory of shortages of both the specialized NP swabs during the early days of the pandemic as well as pressure on the trained medical personnel needed to perform the tests point to the need for simpler COVID-19 testing.

In a real-world trial, a team of clinician-researchers at Beth Israel Deaconess Medical Center (BIDMC) have demonstrated that tests of self-collected saliva provided comparable results to tests performed by trained healthcare professionals using NP swabs. The researchers concluded that saliva tests detect 93 percent of COVID-19 infections in an outpatient setting. The findings, which are published in the journal Microbiology Spectrum, could help alleviate the testing bottlenecks that have constrained COVID-19 testing since early in the pandemic.

“Saliva self-collection is simply easier and more comfortable than the alternative of NP swabs, which in addition to the discomfort also require a trained medical professional,” said corresponding author Ramy Arnaout, MD, PhD, associate director of the Clinical Microbiology Laboratories at BIDMC. “In addition to it being a more convenient method, our findings show saliva collection can also be just as effective—even in a real-world scenario in which there are no eating or drinking restrictions before the saliva is collected.”

Arnaout and colleagues obtained two samples—one via NP swab, the other saliva—from 385 patients presenting for COVID-19 testing at BIDMC. Patients waiting in line for NP testing were given a sterile sample collection cup and asked to provide a three-milliliter saliva sample. Saliva samples were processed either untreated or treated with a preservative, and all samples were tested across two different COVID-19 testing platforms.

After finding that virus particles remained stable in both treated and untreated saliva samples for at least 24 hours, the researchers demonstrated high concordance, or agreement, between saliva testing and NP testing. That is, results came back the same in 93 percent of cases. Among the 385 samples taken, just nine had mismatched results between the NP and saliva test results. Most of the mismatches were at very low viral loads, making them clinically less worrisome, and saliva detected as many infections that NP missed, as vice versa.

Arnaout and colleagues reported that the sensitivity of NP testing was still slightly higher that of saliva testing, with NP testing able to detect viral particles at lower concentrations. However, the researchers found that saliva testing is still likely to detect 90 percent of COVID-19 infections and concluded that the minor loss in sensitivity is outweighed by the ease and safety of self-collection.

“We have demonstrated that for practical purposes, saliva is comparable to NP swabs for COVID-19 testing in outpatient settings,” said Arnaout, who is also associate professor of pathology at Harvard Medical School.

The study results were announced in tandem with a first-person retrospective and analysis published in the Journal of Clinical Microbiology in which Arnaout details the collaborative and open-source effort he coordinated to address the shortage of swabs that hampered the nation’s ability to test for and track the spread of COVID-19 in the early days of the pandemic, and details the lessons learned. The team’s earlier effort to catalyze the development of novel NP swab designs that could be manufactured quickly and in large numbers resulted in four 3D-printed prototypes that were validated in clinical testing. The four swab prototypes were selected from among more than 100 swab designs made of 45 different materials submitted by 23 companies, laboratories, and individuals across the country for BIDMC’s evaluation.

Study coauthors included Cody Callahan, Sarah Ditelberg, Sanjucta Dutta, Nancy Littlehaled, Annie Cheng, Kristin Kupczewski, Danielle McVay, Stefan Riedel, and James E. Kirby of BIDMC.

This work was supported through a sponsored research agreement with Abbott Molecular. Dr. Kirby has received reagents from Abbott Molecular for unrelated studies under a COVID-19 Diagnostics Evaluation Agreement. All other authors have not declared any potential conflicts of interest.

- This press release was originally published on the Beth Israel Deaconess Medical Center website